stay clear of exposing the film to Excessive temperatures: Self-adhesive PDLC film shouldn't be exposed to Severe temperatures as This could certainly damage the film. stay clear of placing the film in locations in which It'll be subjected to immediate daylight or around heat sources including radiators or stoves.

chances are you'll have on nitrile gloves during installation; get rid of the adhesive facet of the protecting layer before starting the installation.

using this said our smart film® is the one switchable film while in the field that won't trigger photo voltaic fracturing.and out gasoline smaller installation associated air bubbles By itself over time.

Smart Film® privateness glass film relates to any new or existing clean glass surface. quickly Regulate our switchable film™ from apparent to frosted (opaque) with the press of a button or command from a smartphone.

We advise the outer dimensions of the film be one/8" shorter compared to glass about all edges when retrofitting on an current glass surface with a border or frame. This enables the technologies to take a seat flush over the glass  supplying the most beneficial effectiveness and steer clear of any pointless trimming in the field. this can also make it possible for tolerance on your wire management to control the film on the electrical connections. Any visible gaps around the edges is often sealed With all the recommended acid cost-free neutral get rid of silicone only for a finished item. For body considerably less glass programs that will have a but glazed edges you can measure from beveled edge to beveled edge.

The Smart FILM’s protective layer on the non-adhesive facet really should be held over the installation until finally the installation approach is totally finished.

remember to analysis your sealing possibilities and apply to the examination place initial , enable to dry and function for 48-ninety six hrs prior to completing. We advise you request a performing sample piece using your buy for this testing purpose.

To continue, be sure to verify that you are a human (rather than a spambot). examining if the positioning link is secure

flip all around Time At Smart Film, we don't just offer you the most effective switchable glass and switchable film engineering available on the market, we offer the very best flip close to instances.

and after that Spray the glass with glass cleanser and clear with a absorbent fabric to completely thoroughly clean and dry. Then Using a lint totally free fabric, wipe the glass area right up until it's dust cost-free.

The protecting liner over the adhesive facet need to only be peeled away following the Smart FIlm® has become applied to the glass and all air bubbles are pressed absent with a squeegee.

(It is recommended that the measurements are accurate to prevent trimming if at all possible ) Warning don't trim , Slice or install materials will driven on.

trustworthy by business leaders around the world, We have now the How to install the self adhesive smart film most extensive on-line database of finished jobs and product information obtainable.

Please make certain to accommodate wherever the wiring is attached towards the film to forestall any write-up-installation destruction.